GB
IMPORTANT! Denotes a situation which can
result in material damage if not avoided.
NOTE Special instructions for ease of un-
derstanding and handling.
2 PRODUCT DESCRIPTION
This documentation describes the following ver-
sions of the Easy Crush shredder:
■
Easy Crush MH 2810 Blade Shredder
■
Easy Crush LH 2810 Drum Shredder
2.1
Intended use
The machine is intended for the shredding of
twigs and branches from trees and bushes with a
maximum diameter of 40 mm (MH 2810) or
42 mm (LH 2810).
This appliance is intended solely for use in non-
commercial applications. Any other use (as well
as unauthorised conversions or add-ons) are re-
garded as contrary to the intended use and will
result in exclusion of the warranty as well as loss
of conformity (CE mark); the manufacturer will
thus decline any responsibility for damage and/or
injury suffered by the user or third parties.
2.2
Possible foreseeable misuse
■
The machine is not intended for commercial
use or in agriculture and forestry.
■
Do not use the machine in rainy weather.
■
The safety devices on the machine must not
be dismantled or bypassed.
2.3
Residual risks
Even during correct use of the appliance, there is
always a certain residual risk that cannot be ex-
cluded. Depending on the use, the following po-
tential risks can be derived from the type and
construction of the appliance:
■
Injuries from flying cuttings
■
Injuries due to inhaling cutting particles
■
Injuries due to reaching into the shredder
mechanism
■
Injuries due to the machine tipping over
2.4
Scope of supply
The scope of supply of the machine comprises
the following components:
■
Base with collector box
■
Shredder upper section with shredder mech-
anism and motor
■
Hopper
20
■
Two transport wheels with wheel caps
■
Bag with assembly parts and operating in-
structions
2.5
Symbols on the machine
Symbol
Meaning
Pay special attention when handling
this product!
Read the operating instructions be-
fore starting operation!
Keep hands and feet away from the
shredder mechanism!
Keep other people out of the danger
area!
Maintain a safety distance!
Always disconnect the machine
from the mains before maintenance
or if the cable is damaged or cut.
Wear protective glasses and ear
defenders.
Wear gloves.
2.6
Safety and protective devices
WARNING! Risk of injury. Defective and
disabled safety and protective devices can result
in serious injury.
■
Have any defective safety and protective de-
vices repaired.
■
Never disable safety and protective devices.
Product description