Technical Data; Safety Instructions; Air Source - BGS technic 8688 Manual Del Usuario

TECHNICAL DATA

Grinding disc size: 152 mm (6")
Grinding disc holder with 6 holes
Shaft thread: M8 x 1,0
Free speed: max. 10,000 rpm
Working pressure: 6.3 bar (90 psi)
Air consumption: 142 L/min
Air inlet: 1/4"
Pressure hose: 10 mm (3/8") (ID)
Weigth: 1050 g
Overall lenght: 225 mm
Sound pressure level LPA: 87dB (A)
Sound power level LWA: 98dB(A)
Vibration level: ah=8.5 m/s² / K=1.5 m/s²
WARNING!
Read, understand and follow all instructions and warnings before operating this tool.
Failure to do so may result in personal injury and/or property damage and will void

SAFETY INSTRUCTIONS

•
Oil tool before each use 4 to 5 drops of a good grade air tool
•
Use proper air pressure and CFM rating listed for this
•
Be sure the air tool is in OFF position when connecting the tool to air
•
Always wear approved eye protection when using tools.
•
Use only accessories which are designed for using with air
•
Be sure to disconnect tool from air supply before changing accessories, performing service on
tool, and when not in
•
Use common sense when operating this air tool. Do not wear loose clothing or
could become caught by moving parts, causing
•
Operate this air tool only in a safe distance from yourself and others persons.
•
Follow the instructions of the air source manufacturers for connection of regulators, filters, and
other accessories to air source.
•
Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
•
Lassen Sie Kinder nicht mit dem Druckluftwerkzeug oder dessen Verpackung spielen.

AIR SOURCE

Clean air of correct air pressure is recommended for the power supply for this tool. A maximum of 90
PSI at the tool is recommended for most air tools of this class. Check specifications section for
recommended pressure. Depending on length of air hose and other circumstances, air pressure at
compressor may need to be increased to 100 PSI to ensure 90 PSI at the tool.
Water in the air hose and compressor tank contributes to reduced performance and damage of the air
tool. Drain the air tank and filters before each use and as necessary to keep the air supply dry. Use
an in-line pressure regulator with gauge if air inlet pressure is critical.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Air Eccentric Grinder
use.
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
oil.
tool.
supply.
If raising dust, wear a suitable
tools.
injury.
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8688
warranty.
mask.
jewelry that