RealFlame 5555 Manual Del Propietário página 14

Installing the Fireplace: Method B
2.) Separate the black, white and green/yellow wires from the cord bundle, removing cable ties if
necessary. Disconnect wires by carefully cutting clamps that secure terminal wires to the power cord.
3-1.) Secure clamp (not included) to the hardwire cover plate (F). Type of clamp needed may vary
based on local codes.
3-2.) Feed supply cord wire through the hardwire cover plate (F) and clamp and secure in place
with the clamp. Connect the green/yellow ground wire to the green supply ground wire,
the white neutral wire to the white supply neutral wire, and the black live wire to the black
live supply wire.
Hardwire Cover Plate (F)
Wire Clamps
Junction Box
Example of wire clamp
Black to Black
Yellow/Green to Green
Hardwire
Cover Plate (F)
14
Wire Cutters
Junction Box
Cover Plate
120 Volt
Power Supply