PowerShot EasyShot 5650 Manual De Instrucciones página 2

USING YOUR EASYSHOT
PowerShot Tool Company brings you a new concept in staplers - putting the power where you need it
directly over the staple exit with its unique forward action stapler. It can be used for a variety of applications around the home and
office . To make sure you get the most from your stapler, please read the following instructions carefully.
EASYSHOT ® STAPLER SELECTION GUIDE
To maximize performance, your EASYSHOT
in three lengths: 1/4" inch, 5/16" inch and 3/8" inch. The EASYSHOT
®
staples such as Arrow JT-21
COMMON APPLICATIONS FOR STAPLE LENGTH:
1/4" Display Signs; Window Shades; Window Screens;
Draperies; Shelf Paper; Light Upholstery; Plastic Film;
Decorations; Paper (2 to 10 sheets)
5/16" Insulation; Upholstery; Weatherstripping; Wall Decorations;
Crafts; Covering Cornices, Leatherettes; Paper (10 to 20 sheets)
3/8" Canvas; Wire Mesh; Upholstery; Low Voltage wire; Foam Board;
Any 1/4" thick material; Paper (20 up to 40 sheets).
1. Loading Staples
Make sure there are no staples jammed from previous usage by checking the handle operation.
CAUTION: IF A STAPLE IS JAMMED, POINT THE STAPLER AWAY FROM YOURSELF AND
!
OTHERS BEFORE OPENING THE TRACK AS THE JAMMED STAPLE MAY BE FIRED OUT UPON
OPENING
i) Turn gun upside down and tilt the gun away from yourself.
ii) Grasp the staple track at the buttons and squeeze to release, then slide it away from the staple chamber, in direction shown
(fig 1).
iii) Drop staples in. Be sure the legs are pointing up (fig. 1a).
Your stapler is now ready for use.
2. Using Your EASYSHOT
The EASYSHOT ® stapler has a unique forward action design to give maximum ease of use and control. To use, grasp the handle of
the stapler, making sure that the staple exit is pointing away from you (fig.2). Place it firmly on the workpiece and push the handle
steadily down towards the staple exit to activate. Maximum leverage is gained by pushing down at the front of the handle using the
force of your arm rather than just squeezing with the hand. In vertical applications the front finger hole provides added support.
® ®
*Arrow and JT-21 and T-27
®
TM
**Stanley and TR45 are registered trademarks of The Stanley Works.
EASYSHOT ® has many other useful features - each designed to help make stapling easier and more comfortable (fig.4).
A. Staples Remaining Window- Use the Staples Remaining Window, located on the left side of the gun,
to determine when it's time to reload
B Finger Hole- Provides an area to grip firmly
C. Track Release- Easy to use and one piece staple track
3. Clearing Staple Jams
In the unlikely event of a staple jam, make sure that the bottom of the stapler is pointing away from yourself and others before carrying out the following
instructions.
WARNING: ALWAYS WEAR EYE PROTECTION.
!
CAUTION: JAMMED STAPLES MAY SPRING FREE UNEXPECTEDLY AS TRACK IS OPENED.
i) Turn the gun sideways so that the staple exit is pointing away from yourself and others (fig.3).
ii) Carefully release track by gripping buttons and pushing away (fig.3).
iii) Slide track out (fig.3a) and remove all remaining staples.
iv) Reload staple gun as described in section 2.
NOTE: The track movement may be stiffer than usual if there is a staple jam.
® STAPLER
® stapler has been designed to work with genuine EASYSHOT
® TM ®
and T-27 * and Stanley TR45
® Stapler
TM are registered trademarks of the Arrow Fastener Company.
® stapler is also compatible with other brands of light duty
TM
** brand light duty staples.
® brand light duty staples