Troubleshooting - JAMO i300 Manual De Instrucciones

Troubleshooting

iPod does not dock
properly in the system
No sound
iPod not charging
Remote control
will not operate
the system
Make sure the proper docking adapter for your iPod
is inserted in the control dock.
Remove the iPod; check the connectors on the
control dock and the bottom of the iPod to ensure
there are no obstructions.
Make sure the iPod is seated properly in the control
dock, turned On, and playing.
If an external device is connected to the control
dock's auxilary input, make certain that device is On
and playing. If you are trying to listen to an iPod in
the dock, unplug the cable from the auxiliary input
on the control dock.
Make certain that the volume is turned up, as
indicated by the Light Bar on the control dock.
Make sure the iPod is properly seated in the control
dock.
Make sure the system is plugged in.
Turn on the power for the entire system and the
subwoofer.
Make sure the battery is properly installed.
If the battery is old, it may need to be replaced.
The remote controller is not pointed
at the remote sensor of the control dock
The remote controller is too far from
the control dock.
13