Remote Sensor - National Geographic 260NE Manual De Instrucciones

6.0 Maximum and Minimum Temperature
1. Press the MAX/MIN button once to display the maximum readings.
Press the MAX/MIN button again to display the minimum readings.
2. To clear the memory, press the CLEAR button when the max/min temperature and
humidity is displayed. It will clear the record of the shown field.
7.0 ºC/ºF Switchable
The default measurement for temperature is °F, press the ºC/ºF button to toggle
between Celsius and Fahrenheid.
8.0 Signal Detection
The signal indicator on the monitor will display the following in the outdoor
temperature window:
No Signal Detected
Signal Detected
.
Successful Reception

9.0 Remote Sensor

1. Press the ºC/ºF button on the back of the remote sensor to change the
temperature measurement to Celsius or Fahrenheit.
2. Press the SELECT button to toggle between temperature reading and the humidity
reading.
10.0 Care of Your Thermometer
• Avoid exposing the thermometer to extreme temperatures, water or severe shock.
• Avoid contact with any corrosive materials such as alcohol, cleaning agents or
perfume.
• Do not subject the thermometer to excessive force, shock, dust, temperature or
humidity. Any of these conditions may shorten the life of the thermometer.
• Do not tamper with any of the internal components of this thermometer.
This will void the warranty and may cause damage.