Remote Controller - AVer CAM540 Guia De Inicio Rapido

Remote Controller

*Function requires AVer PTZApp
**Not support for CAM540
 1: If you only have one camera and don't need to do any setting, the default is camera 1. If you
press camera 2 or 3 on the remote control, you will find your remote can't control your camera. In
this case, please press camera 1 on your remoter again.
 2: Press for 1 second can switch the Smart framing function between auto and manual
 AAA Batteries (required)
Making a Video Call
A computer is required to use this device.
Step 1: Open your video collaboration application such as Skype
TM TM
Hangouts , ZOOM
Ringcentral, BlueJeans, Fuze.
Step 2: Set the CAM540 as your primary camera device in your application (Please consult your
application setup guide for details).
Step 3: Ready to make a video call.
[Note] CAM540 is a Plug-n-Play Conference Camera. The system requires no special drivers. For
advanced setting and firmware update, please go to
download the AVer PTZApp.
Camera select
Camera Directional
control
Line In**
2
SmartFraming
Zoom In/Out
Preset
Brightness -
Call/Answer*
TM
, WebEx , Adobe Connect
1
Enter**
TM
, WebRTC, TrueConf, V-Cube, U-meeting,
http://www.aver.com/download-center
English-4
TM
, Skype for Business, Google
to