Goclever CITY BOARD KARTING KIT Guia De Inicio Rapido página 5

Step 3: Handles: Use Allen wrench (2) and Allen key (1) to assemble handles
with four Allen screws M8*50MM (3) and four Anti-slip nuts M8 (6). Make sure
that you have attached the handles correctly before next step.
Step 4: Front tube: put the tube into it and adjust the suitable hole. Use the
knob (4) to fit it in suitable length.
Step 5: Attach the complete assembly to a board and adjust the nut on the end
of the transverse support, so that it fit the board size. Fasten this assembly to
the board with the belts. Check if the belts are firmly tightened before each
using.
4