MINUSWIRE MW-1000Pro Guia Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
Power On (Fig. 8)
Uncover the lid and take out earbuds and they will power on automatically.
8
L
Power Off (Fig. 9)
Put the earbuds into the charging case and they will turn off automatically.
9
L
R
Pairing
• You can use one earbud or both earbuds as per your preference. Please
refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the
device to be connected close to the earbuds.
05
R
• When the earbuds are disconnected from your device for more than 5 minutes,
they will turn off automatically.
Couple Earbuds Mode
1. Uncover the lid and take out earbuds to turn on the earbuds, they will connect
with each other automatically. Once connected, The LED indicators on both
earbuds will flash white indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby devices.
Find "MW-1000Pro" in the searching results, tap on the name to connect.
3. Once connected, the LED indicators on both earbuds be turned off.
Note:
• If the earbuds failed to pair with each other, please disconnect the Bluetooth
connection with your device, put them back into the charging case, close the lid
then open it and take out the earbuds to pair again.
• It is not recommended to wear the two earbuds on different people. If needed,
please keep the 2 earbuds within 3 meters / 9.8 feet in couple earbuds mode.
Single Earbud Mode
1. Take out one earbud from the charging case, and make sure the other one is
placed in the charging case.
2. It will try to pair with the last paired device first then enter pairing mode with its
LED indicator flashing white if pairing failed.
3. Turn on the Bluetooth function on your device and search for nearby devices.
Find "MW-1000Pro" in the searching results, tap on the name to connect.
4. Once connected, the LED indicator will be turned off.
Note:
If you want to change to couple mode, simply take out the other earbud from the
charging case, they will pair with each other automatically.
06

Publicidad

Tabla de contenido
loading

Tabla de contenido