Jabra ANG001 Manual De Instrucciones página 5

Mounting the Jabra Noise Guide to the table stand
UK · Quick star t · Jabra Noise Guide
1
Contents:
• Base
• Table grip
• Tube A and B
3
Pull the cable through tube B.
B
1
Pass the cable through the disc
base, and then through the hole
in the table grip.
A
4. Assemble tube A and B. Screw tube AB onto
the base disc and connect the Jabra Noise
Guide to the power cable. Screw the Jabra
Noise Guide onto the tube. Mount to a flat
surface and tighten the screw on the table grip.
5
5. Please ensure that the cable comes out where
there is a hole in the disc base so the cable is
not pinched. IMPORTANT! In order to prevent
damage to your Jabra Noise Guide, we recom-
mend that you always use the table grip as
shown in this picture.
B
A
2
Pull the cable
through tube A.
A
4
B