Avid Pro Tools Express Instrucciones página 17

To set the Click settings:
Setup > Click/Countoff
1 Choose
2 Select one of the following options:
During play and record
•
during playback and recording
Only during record
•
while recording and not during playback
Only during countoff
•
when counting off before recording or play-
back starts
Main Counter selector (in the Edit window)
OK
3
Click .
To silence the click track:
Do one of the following:

• Mute the Click track by clicking the
(Mute) button in the Track controls for the
Click track.
– or –
• In the Transport window, deselect the Met-
ronome button so it is not highlighted blue.
Then deselect the Count Off button so it is
not highlighted. (Doing both silences the
click track and disables Count Off.)
.
—the click sounds
—the click only sounds
—the click only sounds
M
Setting the Session Meter
Be sure to set the session meter to match the me-
ter of your music. If your session's meter does
not match the music you're recording, the ac-
cented clicks from the Click track will not line
up with what you're playing, and, as a result, the
recorded material may not align with the bars
and beats grid in the Edit window.
To set the meter for a session:
1 Double-click the Current Meter button in the
Transport window.
Current Meter button
Meter
2 Enter the for the session and set the
Location
to 1|1|000 (to ensure that the inserted
meter event replaces the default).
Meter Change window
Click
3
From the pop-up menu, select a note
value for the beat. (For example, if you are in
6/8, select a dotted-quarter note).
OK
4
Click to insert the new meter event.
Introduction to Pro Tools Express 11