HOW TO OPERATE
Auto, Heat, Cool, Dr y
2
Select the
desired
operation.
Powerful and Quiet operations can be activated in all
operation modes.
OFF/ON
button again to stop the operation.
Press
Hints
To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.
Heat is obtain from outdoor air to warm up the room. Use an additional heater when the outdoor ambient temperature is low.
Troubleshooting
The room has a peculiar odour.
Air conditioner does not cool or heat efficiently.
OFF/ON
MODE
FAN SPEED
POWERFUL
AUTO
AIR SWING
QUIET
MANUAL
TIMER
ON
SET
1
2
3
OFF
CANCEL
CHECK
CLOCK
RESET
INVERTER
This may be a damp smell emitted by the wall, carpet, furniture or
Ensure the temperature has been set correctly.
Ensure windows and doors have been closed properly.
Ensure inlet and outlet vents of the units have not been obstructed.
1
Start the
operation.
3
Set the
temperature.
(16°C ~ 30°C)
clothing in the room.
Ensure filters are cleaned or replaced when necessary.
Operation Details
AUTO - Automatic Operation
• The unit will automatically select
the operation mode according
to the setting, outdoor and room
temperature. During operation mode
selection, power indicator blinks.
For every 30 minutes, the operation
mode is reselected.
HEAT - Heating Operation
• Enables you to enjoy the warming
effect at your preferred setting
temperature.
• For cold air prevention, air might
not blow out immediately and power
indicator blinks when operation starts.
• Also operates in defrost mode
(maximum 12 minutes) where by the
power indicator blinks. The melted
frost is drained at outdoor unit and
indoor fan is stopped.
COOL - Cooling Operation
• Enables you to enjoy the cooling
effect at your preferred setting
temperature.
DRY - Soft Dry Operation
• Enables you to set the desired
temperature at low fan speed which
provides you with dehumidifying
surroundings.
5