Publicidad
Idiomas disponibles
Idiomas disponibles
DOWN MIX
To playback a DVD VIDEO
disc recorded with surround
multichannel audio
correctly, the DOWN MIX
setting must be properly
made according to your
audio system.
Note that this setting affects the output signal from the
AUDIO (both DIGITAL and ANALOG) output jacks when
playing back a DVD VIDEO disc recorded with surround
multichannel audio.
• Lt/Rt
When you enjoy multichannel surround audio by
connecting the unit's AUDIO output (normally, the
DIGITAL output) to a surround decoder.
• L
/R
0
0
When you enjoy conventional 2-channel stereo audio
by connecting the unit's AUDIO output to a stereo
amplifier/receiver or television set, or when you
duplicate audio of a DVD VIDEO disc recorded with
surround audio to your MD, cassette, etc.
NOTES
• The Down mix function does not work when the 3D
PHONIC function is activated.
• The DOWN MIX setting does not affect an MPEG or
Dolby Digital bitstream signal from DIGITAL OUT.
To enjoy the DOWN MIX effect from DIGITAL OUT when
playing back a disc recorded with the MPEG
multichannel or Dolby Digital format, set "DIGITAL
AUDIO OUTPUT" to "PCM ONLY" (see page 40).
• When playing back a disc recorded with DTS, you
cannot get the DOWN MIX effect from both DIGITAL
and ANALOG outputs.
COMPRESSION
You can compress the dynamic
range of the sound if needed.
Using this function, you can
listen to sound at low volumes
easily.
• ON
Audio is played back with the dynamic range
compressed.
• OFF
Audio is played back as it was recorded.
NOTES
• The Compression function works only when playing
back a disc recorded with DOLBY DIGITAL 1CH or 2CH.
The setting is not effective for other discs.
• The Compression function does not work when the 3D
PHONIC function is activated.
• With the digital connection, the COMPRESSION
settings in the AUDIO page of the preference display
are invalid. Settings for these items must be made from
the decoder.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
DIGITAL AUDIO OUTPUT
STREAM / PCM
DOWN MIX
Lo / Ro
ON
COMPRESSION
EXIT
PRESS
KEY
LANGUAGE
AUDIO
DISPLAY
SYSTEM
DIGITAL AUDIO OUTPUT
STREAM / PCM
Lo / Ro
DOWN MIX
ON
COMPRESSION
EXIT
PRESS
KEY
DISPLAY page
MONITOR TYPE
You can select the monitor
type to match your TV
when you playback DVD
VIDEO discs recorded for
wide screen televisions.
• 4:3 LB
(Letter Box Conversion)
When you connect a normal
TV to the unit.
When you play a wide picture
recorded on a DVD VIDEO disc,
the picture is displayed with
bands across the upper and
lower portions of the screen.
• 4:3 PS
(Pan Scan Conversion)
When you connect a normal
TV to the unit.
When you play a wide picture
recorded on a DVD VIDEO
disc, a portion of the picture is
automatically cut off from the
left and right sides of the
image.
Depending on the disc, it may not be possible to
playback in this mode. In that case, the picture is
played back as in 4:3 LB
• 16:9 WIDE (Wide Television screen)
When you connect a
wide-screen TV to the
unit.
SCREEN SAVER
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
• MODE 1
The current picture gets
dark.
• MODE 2
The "screen saver" picture
appears and its brightness
changes.
• OFF
The screen saver function is off.
NOTES
• The monitor screen of a projector or projection TV is
easily burned out if the screen saver mode is set to OFF
and a static picture is displayed for a long time.
• The screen saver function is not activated when the
selected disc is an Audio CD.
Initial settings
LANGUAGE
AUDIO
DISPLAY
SYSTEM
4:3 LB
MONITOR TYPE
MODE 2
SCREEN SAVER
ON
ON SCREEN GUIDE
EXIT
PRESS
KEY
mode.
LANGUAGE
AUDIO
DISPLAY
SYSTEM
4:3 LB
MONITOR TYPE
SCREEN SAVER
MODE 2
ON SCREEN GUIDE
ON
EXIT
PRESS
KEY
English
41
Publicidad
Capítulos
