Fitting Instructions; Care Instructions - medi Rhizomed Manual Del Usuario

English
Advice for the orthopaedic technician
Please ensure when fitting the brace that the hand/thumb
position is at an angle of 45° (see diagram).

Fitting instructions

• Open all hook and loop fasteners and slip the orthosis
onto your hand (a).
• First close the hook and loop fastener at the thumb (b),
then the pressure point on the palm(c), and finally tighten
the wrist strap and secure (d). If the strap is too long, the
fastener may be removed and the strap trimmed with a
pair of scissors.
• Please note: do not fasten the hook and loop at the thumb
too tightly. If you experience pressure pains loosen the
fastener. Consult your orthopaedic technician or doctor
should pain continue.
• If you feel pressure pains on the back of your hand please
attach the enclosed hook and loop pad to the strap (e).
• The enclosed strap can be used to provide additional
thumb stability: attach the hook and loop tab to the alu-
minium splint below the thumb strap opening, then pass
the strap around the thumb and fasten.

Care instructions

Hook and loop fasteners should be closed for washing.
Soap residues, lotions and ointments can cause skin
irritation and material wear.
• Wash the product by hand, preferably
using medi clean washing agent.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
    