6. Insert the speaker straight into the mounting opening. Tighten the
speaker clamp screws on the front of the speaker baffle. The speaker
clamps will automatically rotate into position and begin clamping the
speaker.
• When you notice resistance on the screws the speaker has been
clamped successfully.
IMPORTANT: Always use low-torque settings. NEVER over-
tighten the clamp screws
Insert Speaker
Insert Speaker
Straight Into
Straight Into
Mounting Cut-Out
Mounting Cut-Out
Tighten
Clamping
Screws
7. Attach the supplied grille. Powerful magnets in the speaker frame will
securely hold the grille in place.
Attach Supplied Grille
6
Painting the Grille
JBL architectural loudspeaker grilles can be painted to match any décor.
If you wish to change the grille's color, its satin finish will function as a
primer coat. For the best results follow this procedure:
1. Gently remove the scrim cloth from the back side of the grille before
painting.
2. Use a high-quality spray paint and apply a thin coat of color. Ensure
that the grille perforations remain free of paint. Filling them with
paint will diminish the speaker's sound quality. If any perforations are
plugged, use compressed air to blow the paint out of the perforations.
Note: If you find any grille perforations that are plugged with paint after
the paint has dried, carefully use a straight pin or sewing needle to
remove the paint.
3. We have included replacement scrim cloths. After the paint has dried,
apply a light coat of spray adhesive to the inside of the perforated grille
All Clamps
All Clamps
Inside
Inside
and attach a new scrim cloth. IMPORTANT: Never spray adhesive on the
Mounting
Mounting
cloth.
Cut-Out
Cut-Out
EXCESSIVE OUTPUT LEVELS
Your JBL loudspeakers feature custom-designed transducers and high-
quality network components featuring high-order filters with steep cutoffs
that reduce the potential of damage to individual speaker drivers and
help the loudspeakers maintain their performance even under extreme
operating conditions. However, all loudspeakers have limits when it comes
to continuous playback. To extend these limits, avoid playback at volume
levels that result in distorted or strained sound.
OBTAINING SERVICE
To obtain service, contact an authorized JBL dealer. Refer to Limited
Warranty, below for more information.
DIMENSIONS
Arena 6IW
Arena 8IW
Arena 55IW
Dimensions are subject to change without notice.
For complete performance specifications, please go to the JBL Web
site: www.jbl.com.
LIMITED WARRANTY
In the USA, this product is covered by a limited 5-year warranty. Other
countries may have different product warranty periods, which are
governed by local regulations. For more information about product
warranty please visit www.jbl.com or contact your dealer.
Mounting Opening
Mounting
Dimensions
Depth
(H x W): 9-13/16" x
3-19/32" (91mm)
7-9/32" (249mm x 185mm)
(H x W): 11-15/16" x 8-15/16"
3-13/16" (97mm)
(303mm x 227mm)
(H x W): 14-1/8" x 6-13/32"
3.0" (76mm)
(359mm x 163mm)
JBL Arena In-Wall Architectural Loudspeaker
Instruction Manual
English
Français
Español
Português
do Brasil
Deutsch
Italiano
Nederlands
Norsk
Suomi
Русский
Svenska
Overall Dimensions
(w/grille)
(H x W): 10-7/8" x 8-11/32"
(276mm x 212mm)
Dansk
(H x W): 13" x 10"
(330mm x 254mm)
(H x W): 15-1/8" x 7-13/32"
(384mm x 188mm)
日本語
Polski
한글
中文
繁體中文
Bahasa
Indonesia