Start Up; Maintenance; Spare Parts; Waste Management - S&P CACB-N Manual Del Usuario

5. START UP

CACB-N with
switch remounted
1
N
2
PTO
VB VM
N 230 V~
50 Hz Ph

6. MAINTENANCE

6.1. MAINTENANCE
Cut off the electric power supply before any intervention and make sure that it cannot be switched
on again during the intervention consign (by locking). Remove dust from the fan wheel blades.

6.2. SPARE PARTS

Code Type
009024 Moto-turbine
009025 Moto-turbine
0000132205 Condenser
0000132206 Condenser

7. WASTE MANAGEMENT

7.1. TREATMENT OF PACKAGING AND GENERAL INDUSTRIAL WASTE (GIW)

The packaging (unconsigned pallets, cartons, fi lms, wooden boxes) and other GIW must be made
reusable by an approved service provider. It is strictly prohibited to burn, bury or dump them in nature.

7.2. TREATMENT OF PROFESSIONAL WEEE

This product must not be dumped or treated with household refuse, but must be deposited in an
appropriate collection point for waste electrical and electronic equipment (WEEE).

8. PUTTING OUT OF SERVICE AND RECYCLING

EEC legislation and our consideration of future generations mean that we should always
recycle materials where possible; please do not forget to deposit all packaging in the
appropriate recycling bins. If your device is also labeled with this symbol, please take it to
the nearest Waste Management Plant at the end of its serviceable life.
M
2
~
4
6 8
3 5 7
4 6 8
VA
Quantity
1
1
1
1
Make sure that the assembly rotates freely (fan
wheel) and that no object is liable to be ejected by
the turbine. Before getting started, the box must
be connected to the network and the cover must
be closed.
Make sure that the current absorbed by the
motor is not more than 5% above the current
indicated (see data label).
Name
Spare moto-turbine for CACB-N 05
Spare moto-turbine for CACB-N 08
Condenser for CACB-N 05
Condenser for CACB-N 08
EN
15