ELECTRICAL REQUIREMENTS cont.
• Electrical shock hazard
• Plug into a mating, grounded 3 prong
outlet.
• Do not remove the ground prong from the
power supply cord.
IMPORTANT: Observe all governing codes and ordinances. Check the location where the air
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
• A grounded electrical outlet within 4 ft. (122 cm) of where the power supply cord exits the air
conditioner, for models:
HWE15XCN
HWE18VCN
NOTE: Do not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
• Free movement of air in the room to be cooled.
• A large enough opening for the air conditioner.
• The air conditioner must not be installed in a through-the-wall sleeve. It can only be installed in
a double-hung window or in a wall. .
NOTE: The outside cabinet louvers must not be obstructed by bushes, trees, etc. Air must be
able to pass freely through the cabinet louvers.
WARNING
• Do not use a plug adapter, extension cord,
• Failure to follow these instructions can
HWE24VCN
INSTALLATION REQUIREMENTS
surge protector, or multi-outlet adapter
result in injury, fire, or electrical shock.
ENGLISH
PAGE 9