Multi Temperature Room - Sharp SJ-WX830A Manual De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26

Multi temperature room

Temperature zone
• Default setting is -18°C.
• See "Storing food" about suitable food for each
temperature zone.
1
Press enter key.
2
Select the
compartment.
The compartments change in the order shown as on
the picture by pressing this key.
3
or
Select
temperature zone.
4
Press enter key.
Note
• The temperature that indicated on the control panel is
not the exact temperature inside.
• All temperature zones are unadjustable.
• When multi temperature room set at -18°C, its
temperature varies depending on the setting of
freezer.
factors as the location of the refrigerator, ambient
temperature and the frequency of door opening.
Notes for multi temperature room
• Move all food to other compartment when you want to
use the assisting modes.
• Wait 30 minutes at least after changing temperature
). The temperature of multi
temperature room is not changed immediately.
• Do not put salt-containing food on the stainless tray
directly. Stainless tray may rust.
Current setting
Temperature zones change in
the order shown as below by
pressing
Assisting modes
• See the next page about operation procedure.
• All assisting modes end automatically.
The temperature is set at 0°C or 3°C automatically.
• The mode of express cool, extra cool, defrost food and
cool down can not be in operation at the same time.
Food with high-moisture may freeze.
This mode is very convenient to defrost
food slowly.
Make sure not to defrost perishable
nutrient.
• When you want to cool down high-
keep it tightly covered or use an airtight
container.
Otherwise it may cause burn injury.
• Do not store the container which the
temperature of its outer surface is 60°C
or higher. Multi temperature room case
may become deformed by that heat.
Note
• Avoid opening the door as much as possible during the
operation.
• All assisting modes stop in the event of a power failure.
The temperature is set to the ending temperature of
each mode after recovery from the power failure.
• Food with strong smell should be wrapped or stored in
airtight container tightly. Otherwise the strong smell may
be spreading to other compartment.
Feature
EN-10

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sj-sx830aSj-px830a

Tabla de contenido