Bahco TAW Serie Manual De Instrucciones página 24

Idiomas disponibles

TAW AND TAS SERIES

TOGGLE BACKLIGHT SETUP

This function will allow user to enable or disable backlight toggle function. If toggle mode is disabled,

BACKLIGHT button turns on backlight and it automatically turns off after five seconds following any

last button press. If toggle mode is enabled, a BACKLIGHT button press will turn on backlight and it will

remain on until next BACKLIGHT button press.

1. From Settings menu, use UP/DOWN buttons to highlight TOGGLE BACKLGHT selection then press

ENTER button.

2. TOGGLE BACKLGHT screen is displayed.

3. Use UP/DOWN buttons to highlight ENABLE or DISABLE (factory default) selection.

4. Press ENTER button to accept selection and exit to Settings menu.

Note: Backlight will turn off when tool powers down either by POWER button press or sleep time.

Note: If toggle backlight is enabled and backlight is on, backlight will remain on during and

after applying torque.