ASSEMBLY INSTRUCTIONS
1. Fasten 1 support rail (F) to the top of the lower side
panels (G) using large screws (H1), as shown.
NOTE: Support rail (F) can be fastened in the back
location according to your preference.
Hardware Used
2. Place the bottom assembly in desired location, then
install a support rail (F) with the finished edge facing
up using large screws (H1), as shown.
NOTE: The support rail (F) may be adjusted by using
different holes in the lower side panels (G).
Hardware Used
3. Fasten the magnet (H9) to 1 top shelf (A) using
the magnet screws (H10).
Hardware Used
H9
Magnet
H10
Magnet Screw
IS6923
1
H1
2
G
3
unfinished edge
x 1
x 2
6
unfinished edge
F
G
G
back
H1
G
F
unfinished edge
H10
H9
A