Giordani Yummy Instrucciones página 8

G Y
UK
IORDANI UMMy
FITTING THE BACKREST
SUPPORT BAR
1. Insert the backrest support bar
in the top of the front legs un-
til you hear the lock into place
click (Fig. 1/ ).
a
OPENING THE HIGHCHAIR
2. Press the two buttons on the
sides of the structure and open
the structure by pulling the two
armrests upwards (Fig. 2/
FITTING THE FRONT AND REAR
LEGS
3.
The front leg has a "u" shape.
align and insert the front legs
into the seat front tubes un-
til you hear the lock into place
click (fig. 3/ ); align and insert
a
the back legs into the seat front
tubes until you hear the lock
into place click (Fig. 3/ ).
b
FITTING THE LINING OF THE
HIGHCHAIR
4.
First insert the padding in the
backrest support bar and secure
it using the velcro fastenings
and straps, then close them by
inserting them into the proper
holes. proceed by closing all
velcro fasteners as shown in fig-
ures 4/ - 4/ - 4/ - 4/ .
b C d e
TRAY ASSEMBLY AND
ADJUSTMENT
5.
Pulling the levers on the sides
under the tray, place the tray on
the armrest rails (fig. 5/ e 5/
a
the tray can be adjusted to two
positions by pulling the levers
on the sides of the tray (Fig. 5/
- 5/ - 5/ - 5/ ).
d e f
hiGhChaiR
(FROM 5 TO 36 MONTHS APPROXIMATELY)
DISASSEMBLY OF THE TABLE
6. Pulling the levers on the sides
under the tray, remove the tray
by pulling it upwards (Fig. 6/
6/ ).
b
ADJUSTING THE BACKREST
7. Lift the two plastic 'triggers' on
the sides of the backrest and
adjust the backrest forward or
backward. Two positions (Fig.
). 7/ - 7/ ).
a a b
REMOVING THE LINING
8.
Open all velcro closures and seat
straps and remove all belts un-
threading them through the holes
of the seat (Fig. 8/
Finally remove the padding from
above (Fig. 8/ - 8/
d
DISASSEMBLY
OF THE HIGHCHAIR
Proceed in reverse order at points
1/5 .
f
MAINTENANCE
Prolonged exposure to the sun
and inadequate washing may alter
the colours. Limit exposure if pos-
sible. If the metal parts get wet or
damp, dry them. To avoid the risk of
fire, do not leave the product close
to strong heat sources (electric or
gas stoves). Clean the product with
a damp cloth or sponge with a mild
detergent. Do not use abrasive
products. Do not bleach.
).
b
C
14
MATERIALS
Cover:
Structure:
-
a
SIZES
Open: L: 78 cm;
H: 98 cm;
D: 54 cm.
Closed:
L: 42 cm;
H: 115 cm;
D: 54 cm.
• WARNING
- 8/ - 8/ ).
a b C
un attended.
).
e
• WARNING
harness is correctly fitted before
use.
• Do not use the highchair unless
all components are correctly fitted
and adjusted.
• Adjust and fasten all components
before using the highchair.
• WARNING
of open fire and other sources of
strong heat, such as electric bar
fires, gas gires, etc. in the near
vicinity of the high chair.
• This product is intended for chil-
dren able to sit unassisted without
the help of an adult.
• Do not use the highchair until the
child can sit up unaided.
• Do not use the highchair if it has
broken, torn or missing parts.
FOR TECHNICAL OR COMMERCIAL
100% Polyester
REASONS, GIORDANI RESERVES
PVC coated THE RIGHT, AT ANY TIME AND ALSO
Steel ONLY IN A SPECIFIC COUNTRY, TO
Polypropylene MODIFY THE TECHNICAL CHARAC-
Polyamide TERISTICS OF THE MODELS DE-
SCRIBED IN THIS LEAFLET, AND/
OR THE SHAPE, TYPE AND NUMBER
OF THE ACCESSORIES SUPPLIED.
WARNINGS
Do not leave the child
Make sure that any
To be aware of the risk
15