Zyxel ZyWALL 2WG Guia De Inicio Rapido página 3

Do the following to make hardware connections for initial setup.
1 Use an Ethernet cable to connect the LAN/DMZ port to a computer. If you configure these ports as DMZ
ports in the LAN or DMZ screen through the web configurator, you can also use Ethernet cables to connect
public servers (web, e-mail, FTP, etc.) to the LAN/DMZ ports.
2 Use another Ethernet cable to connect the WAN port to an Ethernet jack with Internet access.
Use the blue console cable if you want to connect the CONSOLE port to your computer. Use
the black dial backup cable if you want to connect the AUX port to an analog modem.
3 Insert a 3G wireless card into the card slot on the side panel to access the Internet wirelessly via a 3G
network. At the time of writing, you can only use the Sierra AC850/860 3G wireless card in the ZyWALL.
4 Use the included power adaptor to connect the power socket (on the rear panel) to a power outlet.
5 Look at the front panel. The PWR LED turns on. The CARD, LAN/DMZ and WAN LEDs turn on and stay
on if the corresponding connections are properly made.
ENGLISH
2