840155200 ENv01
7/7/06
Control Panel
ON/OFF Button
Indicator Light
Program/
Automatic Brew
Additional Features
Pause 'N Serve
This feature allows you to pour a cup
of coffee before the entire brew cycle
has completed. By removing the
Carafe, the flow of coffee from the
bottom of the Filter Basket will stop.
Automatic Shutoff
The Automatic Shutoff feature
shuts off the Keep-Hot Plate 2 hours
after brew cycle begins. Always turn
Coffeemaker OFF and unplug
when finished.
To Set the Clock and Program Automatic Brew
NOTES:
• The Automatic Brew feature must be programmed each time it is used.
• Make sure you have placed the desired amount of water and coffee in the unit
before using the Automatic Brew feature.
1. Plug in Coffeemaker. The numbers
on the Clock will flash until the time
is set.
2. Press the H button until the current
hour is displayed. AM or PM will
appear on display. Press the M but-
ton until the current minute is
displayed. The Clock is now set.
3. To program Coffeemaker to auto-
matically begin brewing, press and
hold the Prog/Auto button for two
seconds to enter the setting mode.
While still pressing Prog/Auto, press
1:53 PM
Page 5
(for clock models)
CAUTION: Return carafe to Keep-Hot
Plate within 20 seconds. Hot water
continues to flow into the Filter Basket
when this feature is used. Overflowing
coffee and hot water are burn hazards.
4. To have Coffeemaker automatically
5. The Coffeemaker will shut off two
Hour
Minute
the H button to set hours and then
press the M button to set minutes
until the desired brew time is displayed.
begin brewing at a preset time, press
Prog/Auto button momentarily. The
Prog/Auto button will glow green to
indicate Automatic Brew is set and
coffeemaker is ready to begin brew-
ing. "Auto" will appear in the display.
hours after brewing begins.
5