Noise/Vibration Information - Bosch PushDrive Manual Original

Cordless screwdriver
Recommended chargers
Protection class
A) Limited performance at temperatures <0 °C
Charger
Article number
– EU
– GB
Battery charging voltage
Charging current
Protection class

Noise/vibration information

Noise emission values determined according to EN 60745-2-2.
Typically, the A-weighted sound pressure level of the power tool is less than 70 dB(A).
Uncertainty K = 3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K determined according to
h
EN 60745-2-2:
Screwdriving: a < 2.5 m/s
h
The vibration level given in these instructions has been measured in accordance with a
standardised measuring procedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibration.
The stated vibration level applies to the main applications of the power tool. However, if
the power tool is used for different applications, with different application tools or poorly
maintained, the vibration level may differ. This can significantly increase the exposure to
vibration over the total working period.
To estimate the exposure to vibration accurately, the times when the tool is switched off
or when it is running but not actually being used should also be taken into account. This
can significantly reduce the exposure to vibration over the total working period.
Implement additional safety measures to protect the operator from the effects of vibra-
tion, such as servicing the power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Bosch Power Tools
2 2
, K = 1.5 m/s
English | 23
PushDrive
V/mA 5/1000
2 609 120 713
2 609 120 718
V
mA
1 609 92A 48W | (07.05.2018)
/ II
5
1000
/ II