Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
Fitting
ANSI S3.19-1974 Table (NRR Table)
A1:
Frequency, Hz
125
250
A2:
Grand Mean Attenuation, dB
19.9
21.6
A3:
Standard Deviation, dB
3.8
2.9
EN352-2:2002 Table (SNR Table)
B1:
Frequency (Hz)
125
250
500
B2:
Mf (dB)
19.8
22.0
26.9
B3:
sf (dB)
3.7
2.9
2.6
B4:
APVf
16.1
19.1
24.3
B5: SNR=30dB
H=34dB
M=27dB
Important
Please read, understand, and follow all safety information.
Fitting
1. Pull the earcups apart
2. Place the product on your head
3. Adjust the earcup position by extending the headband to
ensure a good fit around the ears
Introduction
Thank you for purchasing ISOtunes® LINK Professional Noise
500
1000
2000
3150
4000
6300
8000
26.4
29.9
37.9
42.6
48.8
44.1
41.7
2.1
2.5
3.7
2.9
3.7
4.1
4.7
1000
2000
4000
8000
30.5
37.7
49.1
41.4
APVf=MF-SF9
(dB)
3.1
3.6
4.0
4.8
27.4
34.1
45.1
36.6
L=21dB
Isolating Earmuffs. These earmuffs have been specifically
designed for use in noisy environments – allowing you to block
out much of the surrounding noise so that you can listen to your
music or talk on the phone with less interruption. This product
has been tested and meets the European Safety Standard
EN352-1:2002, EN352-8:2002 and the ANSI & NIOSH standards
for a hearing protector, with a Single Number Rating (SNR) of 36
dB with a Noise Reduction Rating (NRR) of 27 dB. Full testing
details are available in the Noise Attenuation section of this
booklet.
NRR
Noise Attenuation
24
APPROVAL: ISOtunes® LINK is tested and approved in
accordance with ANSI S3.19-1974 Specifications and the
European Safety Standard EN 352-1:2002 and EN352-8:2002.
ANSI
S3.19-1974
The level of noise entering a person's ear, when ISOtunes®
LINK headphones are worn as directed, is closely approximated
by the difference between the A-weighted environmental noise
level and the Noise Reduction Rating (NRR). Improper fit of this
device will reduce its effectiveness in attenuating noise. Consult
the enclosed instructions for proper fitting.
A1: Frequency (Hz)
A2: Mean Attenuation (dB)
A3: Standard Deviation (dB)
Example:
1. The surrounding noise level measured at the ear is 100 dB.
2. The NRR of ISOtunes® LINKis 24 dB.
3. The noise level entering the ear is approximately equal to 76
dB.
EN | 14

Publicidad

Tabla de contenido
loading

Tabla de contenido