Westfalia 313 404 Instrucciones De Instalación Y Funcionamiento página 24

GB
The bolt length at point "b" is designed for ball plates with a flange thickness of 15 - 25 mm, e.g.
Westfalia Order No. 329 060.
If other connecting devices are used, correct length, strength and tightening torque of the screw
fittings must be ensured.
If installing the towing bracket necessitates the removal of the towing eye, the towing bracket
serves as a replacement, provided the permissible towed weight is not exceeded and the towing
takes place on normal roads.
If present, remove insulating compound and/or underseal in the area of the towing-bracket contact
surfaces. Coat bare bodywork with anti-corrosion paint.
The fixing points specified as standard must be observed.
National guidelines concerning official approval of auxiliaries must be observed.
These installation and operating instructions must be enclosed with the vehicle papers.
Parts of Towing Bracket
Item Description
1 cross pipe
2 Side piece
3 Clip
4 Shackle
5 Electrical socket bracket
6 Hexagon bolt M 6 x 16; property class 8.8
7 Hexagon bolt M 10 x 30; property class 8.8
8 Hexagon bolt M 10 x 50; property class 10.9
9 Hexagon bolt M 12 x 1,25 x 50; property class 10.9
10 Hexagon bolt M 16 x 50; property class 8.8
11 Washer 10,5
12 Washer 12,5 x 30 x 3
13 Washer 17 x 30 x 3
14 Hexagon nut M 6; property class 8
15 Hexagon nut M 10; property class 10
16 Hexagon nut M 12 x 1,25; property class 10
17 Hexagon nut M 16; property class 8
18 Sealing plug
19 Installation instructions
24
Qty.
1
2
2
2
1
2
2
4
10
4
10
20
8
2
4
10
4
2
1