System Requirements - Targus CHILL HUB XC Guia Del Usuario

Targus Notebook Cooling Chill Hub XC
GB – Introduction
Congratulations on your purchase of the Targus Notebook Cooling Chill Hub XC.
This cooling device dissipates thermal heat, reducing your computer's overall
temperature, resulting in maximum performance. It also allows you to connect
through a single USB connection up to 4 USB devices. Its thin yet durable design
is both portable and sturdy.
Features
• 2 USB powered fans
• Tilted ergonomic design for the ideal positioning of your laptop

System Requirements

• USB 1.1/2.0 compliant port
To Use the Chill Mat
1. Remove the USB cable from the bottom of the Chill Hub.
2. Decide on where you want to place the Chill Mat, either on a work surface,
such as a table or desktop, or your lap. If you choose to use the Chill Mat on a
work surface, you can extend the feet to the required angle.
3. Place the Chill Mat on the work surface or your lap.
4. Position your laptop computer on top of the Chill Hub.
5. Connect one end of the USB cable into the mini-B USB port located at the
rear of the Chill Hub.
6. Connect the other end of the USB cable into an available USB port on your
laptop computer.
7. Turn the fan on by sliding the Power switch to "I" for low speed fan and "II" for
high speed fan.
8. To connect a USB device to the Chill Hub, plug the USB cable from the device
into an available port on the Chill Hub.
TM
6
Targus Notebook Cooling Chill Hub XC
1
Mini-B USB port
8 7
DC port
USB port
Power switch
0 I II
5
6
WARNING: Keep all items, such as loose clothing and
jewelry, and long hair away from the fans to avoid possible
personal injury or damage to the Chill Mat or your
computer.
7
TM
2
Laptop
(not included)
4
3