Use; Synchronisation Of Mechanical Reading; Activating The Radio Module - Maddalena Arrow EVO Instrucciones Para La Instalación Y Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3

Use

The fully operational phase involves remote
meter reading via the radio modules. Each
radio module transmits the reading with a
settable frequency (default: reading trans-
mitted every 16 seconds). Simply approach
the meter with a suitable receiver or, if there
is a fixed reading system, the data will be
collected automatically.
WARNING!
l
Reading of data can be performed
using various software. Please
consult the metering operator for
more information on the specific
use of reading software.
3.1 Synchronisation of
mechanical reading
The radio module stores the volume record-
ed via an inductive sensor. The module is
set-up in the factory with initial volume at
zero.
If the meter on which the radio module is
installed has a reading other than zero,
synchronisation of the mechanical meter
reading and radio module is recommended
using the programming kit. Simply read the
value in litres on the meter and set the read-
ing using the programming software.
22

3.2 Activating the radio module

The Arrow
module is deactivated by de-
EVO
fault, therefore it will not transmit nor count.
To activate the module: insert the red acti-
vation key (1) in the appropriate slot (2) and
keep it there for over 10 seconds.
If the key is inserted for less than 10 sec-
onds, the module is NOT activated.
1
WARNING!
l
For a complete list of program-
ming parameters and relative set-
tings, refer to the specific manual.
PROHIBITED
d
Programming of the Arrow
module without approval of the
metering operator is not permit-
ted.
EN
EVO

Publicidad

Tabla de contenido
loading

Tabla de contenido