Loading Paper - Genie LP21 Manual Del Usuario

3. LOADING PAPER

1. Plug in calculator and turn it on.
2. Cut or tear evenly the end of paper rolls to get a straight, even edge for proper
feeding through the printer head.
3. While holding the paper roll in one hand, feed the paper from the bottom of the roll and
insert into the paper slot at the back of the calculator.
4. Depress paper feed key until the paper catches and advances through the printer.
5. Place the paper roll on the dual paper holders.
PLEASE TAKE NOTE:
1. Please DO NOT pull the paper in a reverse way once the paper is loaded
into the printer.
2. Please DO NOT pull the paper out from the printer.
3. ALWAYS tear the paper with a Paper Cutter before removing the paper from the
printer.
Correct method of removing the paper
26