Choosing The Method To Connect: Via Wireless Lan Or Other Method (Mf628Cw Only); Connecting Via A Wired Lan; Checking Before The Setup; Connecting Via A Usb Cable - Canon imageCLASS MF628Cw Manual Del Usuario

Choosing the Method to Connect: Via Wireless
LAN or Other Method (MF628Cw Only)
Do you want to use the
wireless LAN to connect
the computer?
The settings can be
configured later.
Yes
There is a button.
Start from step 4 of "Push Button Mode" (P.11).
Yes
There is no button.
Start from step 4 of "Setting the Access Point
Manually" (P.12).
Connect to the computer via a wired LAN
Proceed to "Connecting via a Wired LAN" (P.10).
Connect to the computer via a USB cable
Proceed to "Connecting via a USB Cable" (P.10).
No
Connect to the computer via a wireless LAN later
Proceed to "Connecting via a Wireless LAN (MF628Cw
Only)" (P.11).

Connecting via a Wired LAN

Checking Before the Setup

Internet
Are the computer and the router (or hub) properly
connected using a LAN cable?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
En
Have the network settings on the computer been
completed?
If the computer is not properly confi gured, you may not use
the wired LAN connection even after completing the following
settings.
NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time. In addition, the machine is set to
the "Wired LAN" by default.
• When you connect to a network environment that is not
security protected, your personal information could be
disclosed to third parties. Please use caution.
• If you connect through a LAN in the offi ce, contact your
network administrator.
10
No
Router
or
hub
LAN cable
Connecting via a Wired LAN
1
Connect the LAN cable.
The IP address will be automatically confi gured in 2
minutes. If you want to set the IP address manually, see
the following items.
e-Manual "Network" ▶ "Connecting to a Network" ▶
"Setting IP Addresses"
2
Install the driver and software using the provided
DVD-ROM.
See "For details on the installation procedures:" (P.13).
Proceed to "Setting a Paper Size and Type" (P.13).

Connecting via a USB Cable

Install the Driver and Software
Install the driver and software on the DVD-ROM included with
the machine.
See "For details on the installation procedures:" (P.13).
Proceed to "Setting a Paper Size and Type" (P.13).
NOTE
• If you connected the USB cable before installing, fi rst
remove the USB cable and then re-install.
Connecting via a USB Cable
Follow the MF Driver Installation Guide to connect the USB
cable.