Mellerware Air Power 35 Black Manual De Instrucciones página 5

- Do not wrap the power cord around the appli-
ance.
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- Supply cord should be regularly examined for
signs of damage, and if the cord is damaged,
the appliance must not be used.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
- Do not touch the plug with wet hands.
- Do not touch any of the appliance's moving
parts while it is operating.
USE AND CARE:
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Do not use the appliance if it is tipped up and
do not turn it over.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Make sure that dust, dirt or other foreign ob-
jects do not block the fan grill on the appliance.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
-
ance's cleaning is not done according to these
instructions.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer's liability null and void.
DESCRIPTION
A Front grille
B Blades
C Rear Grill
D Oscillation knob
E Speed control
Body fixing screws
F
G Desk fan base
Desk fan base fixing
H
I Inner tube*
J
K Stand fan base*
L Stand fan base fixing*
(*) Only available in the model AIR POWER 50
BLACK, AIR POWER 50 WHITE
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Ensure that the fan is switched off from the
supply mains before start any installation or
assembly operation.
- The plug must be easily accessible so it can be
disconnected in an emergency.
ASSEMBLING THE DESK FAN BASE (FIG.3):
-
appliance face down.
- Fit the base with the column and secure it with
the screws provided (H).
- Stand the appliance up again so as to check
that the base works properly.
-
ASSEMBLING THE STAND FAN BASE (FIG.3):
-
appliance face down.
- Fit the base with the column and secure it with
the screws provided (L).
- Stand the appliance up again so as to check
that the base works properly.