Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
LOCATION OF INSTALLATION
Install your Dompel product in a level and non-grooved place,
avoiding rocking and vibration. The place must be airy, but can't have
direct incidence of sunlight and has to be far away from heat sources
outdoors.
SECURITY
Avoid accidents. After removing the product from the packaging,
keep the packaging material far away from kids.
CLEANING AND MAINTENANCE
Do not use metal spatulas, brushes and cleaning agents such as
alcohol, acetone, kerosene, gasoline, bleach, thinner, solvents, acids,
vinegar or other chemicals or abrasives not recommended in this
manual.
To clean it easily, it is recommended to use a solution with warm
water and neutral soap and after dry carefully. Plastic parts can't be
washed with boiling water. Do periodical cleaning on your equipment,
accumulated dust can affect the beauty of the product.
INSTALLATION AND ASSEMBLY
Remove all components from the package. The 4 casters are in a
plastic bag inside the carton. The assembly of this product is totally
manual and requires no tools.
1
2
MERELY ILLUSTRATIVE IMAGES.
Products may suffer changes in its components without prior warning.
If any questions, contact Dompel.
1. Manually assembly the four casters (B)
to the bottom of the base of the assembled
frame (A) (make sure they are snug and
2. The removable drawers can be
attached to the sides of the table
top to extend the working space
as desired.
Publicidad
