Installation Instructions For Amd K7 Clip - Gigabyte 3D Rocket Cooler GH-PCU22-SE Guia De Instalacion

Installation Instructions for AMD K7 Clip

A
B
Figure 2-1 Figure 2-2
Figure 1
Please add an adequate layer of heat sink paste on the
surface of the CPU. The picture on the right shows the three
Figure 1
insert spaces on the cooler bracket where the CPU clips
attach.
Figure 2
Place point A of the clip (Figure2-1)on point B at the bottom
of the cooler(Figure2-2).As Figure 2-3.
Figure 2-3
Figure 3
Align the three spaces on the cooler with the three clips on
the base of the CPU and make sure point A of the clip
(Figure 2-1) is placed on point B at the bottom of the cooler
(Figure 2-2) and push down on the clip until it' s firmly
Figure 3
locked.
Figure 4
Connect the 3-pin connector to the CPU fan connector on the
Figure 4
motherboard. Clip Installation is now complete.
If fan speed control is required, please refer to
"Installation of the Fan Speed Control Cable".
- 13 -
GH-PCU22-SE