Safe Use - Berner 1.06/1 Instrucciones De Manejo

4. Safe Use

OVERLOAD HAZARD. The puller may break if it is overloaded causing damage,
SERIOUS INJURY, or DEATH.
ALWAYS take the following precautions to avoid damage, serious injury, or
death:
• NEVER use electric or pneumatic torque multipliers or impact wrenches.
• NEVER use electric, pneumatic or percussion drivers.
• NEVER lengthen the drive tool for the puller.
• NEVER hit the drive tool with a hammer.
• If maximum force has been applied, and the part has not moved, use a
puller with a larger capacity.
• DO NOT hit the part with a hammer in an attempt to jar it loose.
• ALWAYS use a Protective Safety Cover when using the puller.
For added safety, GEDORE highly recommends the
use of a Protective Safety Cover (shown in photo)
when using the puller.
Cover the puller setup and part to be pulled with the
Protective Safety Cover* before applying force. High
forces exerted on the part being pulled can cause
breakage and flying debris. Safety covers provide
maximum active-safety protection from suddenly
detaching ball bearings, driving pinions, or other
small parts.
* See Section 7, Optional Accessories. Protective Safety Cover
available at www.gedore.com, part number 5.10.
EN
11