Declaración Del Fabricante; Manufacturer'S Declaration - Eurotherm Drives 506 Manual De Instrucciones

Declaración del Fabricante

MANUFACTURER'S DECLARATION

are components to be incorporated into machinery and may not be operated alone.
The complete machinery or installation using this equipment may only be put into
service when the safety considerations of the Directive 89/392/EEC are fully adhered
Particular reference should be made to EN60204-1 ( Safety of Machinery - Electrical
All instructions, warnings and safety information of the Product Manual must be
.........................................
Dr Martin Payn,
Conformance Officer
Eurotherm Drives Ltd
EUROTHERM DRIVES LIMITED
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7PD
TELEPHONE: 01903 721311
Registered number: 1159876 England. Registered Office: Leonardslee, Lower Beeding, Horsham, West Sussex RH13 6PP
File Name: P:\PRODUCTS\CE\SAFETY\PRODUCTS\507\PRODFILE\HK38996154.918
ISS: DATE
A 09.12.96
506/507/508
Since the potential hazards are mainly electrical rather than
mechanical, the 506/507/508 does not fall under the machinery
directive. However, we do supply a manufacturer's declaration for
when the 506/507/508 is used (as a component) in machinery.
The following Electronic Products
Equipment of Machines).
........................................
Dr Dan Slattery,
Technical Director
Eurotherm Drives Ltd
FAX: 01903 723938
DRN: FEP
CHKD: MP
E
Certificación 506/507/508
506/507/508
to.
adhered to.
DRAWING NUMBER:
TITLE:
506/507/508 Machinery Directive
E U R O T H E R M
D R I V E S
9th December 1996
......................................
Date
© 1997 EUROTHERM DRIVES LIMITED
HK389961C918
Issue D 20.02.1995 GA387648C017
6-5
SHT 1
OF
1 SHTS