11. REVERSING
On reversing, DRIVE FASTGO FULL HD will enter reversing visual mode automatically.
After the reversing period ends, it will automatically return to recording mode. You can
set red lines by using "up button"/"down button" and adjust the position. setting will be
saved. Note: Upon first installation, ensure that camera & Camera cable & power cable
are properly connected.
12. PARKING MONITORING (PARKING GUARD)
Camera begins recording only when movement is detected. The recording will be ended
automatically if no change of image will be detected. Be aware that (in some vehicles)
the camera is left unpowered when the engine is turned off. The camera will only be
operative until the camera's internal battery is discharged. Options to choose from are:
ON/OFF
13. LOOP RECORDING (MOVIE CLIP TIME)
OFF minutes according to your selection in video settings. Once the SD card is full,
the unprotected files will be overwritten in a time loop sequence.Enhanced Night Vision
Option can be turned ON/OFF in video settings menu. This function enhances the quality
of night recordings.
The camera supports up to 128 GB cards after formatting the FAT32 card.
EXPLANATION OF SYMBOLS
DECLARATION OF COMPLIANCE WITH EUROPEAN STANDARDS
This device meets the requirements of the EMC (2014/30 / EU) electro-
magnetic compatibility and LVD low voltage (2014/35 / EU) directive,
therefore the CE mark was affixed to it and a declaration of compliance
with European standards was issued for it.
This symbol means that the product must not be disposed of with oth-
er household waste. The law prohibits, under a fine, the combination of
waste electrical and electronic equipment together with other waste. You
can prevent potential negative effects on the environment and human
health that could arise from inappropriate handling of waste from used
electronic equipment if the product is disposed of properly.
The symbol means that the packaging contains an instruction manual that
must be read before use
-The camera saves video every 1,3,5/
GB
4