Tabla de contenido
Publicidad
Panel
Picture Menu
Item
Image mode
Contrast
Brightness
Colour saturation
Colour tone
Definition
Aspect ratio
Colour temperature
Noise reduction
Sound Menu
Item
Sound mode
Treble
Bass
Balance
Auto control
Menu Menu
Item
Menu language
Menu display time
Menu transparency
Blue screen
Sleep timer
System reset
PC Menu
Item
Auto adjust
Horizontal position
Vertical position
Frequency
Phase
48
ActivPanel Touch User Guide
Function
Adjust the overall image effect
Adjust the overall image layering
Adjust the overall image brightness
Adjust the colour depth
Adjust the colour tone
Adjust the image definition
Adjust the image display scale
Adjust the overall colour temperature
Set the noise reduction level
Function
Select a sound effect
Adjust the treble
Adjust the bass
Adjust the balance between left and right
track
Auto control the volume
Function
Set the menu language
Set the menu display time
Set the menu transparency
Set whether to switch to blue screen if no
signal is input
Set a time for auto standby
Restore the factory default settings
Function
Auto adjust the screen
Adjust the horizontal position
Adjust the vertical position
Adjust the frequency
Adjust the phase
Description
[Standard], [Soft], [User] or [Bright]
The greater the value (0-100), the higher the layering
The greater the value (0-100), the higher the brightness
The greater the value (0-100), the deeper the colour
The greater/smaller the value (0-100), the greener/purpler the tone
The greater the value (0-100), the higher the definition
[Full Screen], [4:3], [Subtitle] or [Movie]
[Standard], [Warm] or [Cool]
[Medium], [High], [Off] or [Low]
Description
[Standard], [Music], [Movie] or [User]
The bigger value (0-100), the higher treble
The bigger value (0-100), the higher bass
Slide to the left/right to increase the left- track/right-track volume
(L50-R50)
If you select [On], the system will auto adjust the volume
Description
[Chinese], [English], [German], [French]
[15s], [30s], [45s]or[60s]
The greater the value (0-100), the higher the transparency
[On] or [Off]
[Off], [15min], [30min], [45min], [60min], [90min], [120min] or
[240min]
Restore the factory default settings
Description
Press the right key on the remote control to auto adjust to the best display
effect
Move the screen display left and right
Move the screen display up and down
Adjust the frequency to track stability and definition
Adjust the phase of the pixel frequency
Operation
Publicidad
Tabla de contenido
