Declaration Of Conformity - Elma 28.00.2 Manual Del Usuario

English
3.2 Assembly and use
- Attach the burner (1) to the grill (2) of the stove using 1 screw M6x18 on Sup-
port A (3); and another 2 screws M6x18 on support B (4).
- Assemble one leg (5) on each corner of the stove grill, using one screw M6x18
and one washer M6 for each leg.
- Install the gas valve (6) on the burner. Turn the valve gently and do not over-
tighten, to avoid damaging the burner thread.
- Connect the gas bottle to the gas valve by means of a butane pipe.
- Open the gas valve to supply the burner. Warning! Extremely flammable gas
will now come out the burner, light the flame immediately.
- Light the gas store by carefully putting a flame near the burner. We recom-
mend you use a lighter or matchstick to do this. Warning! Do so with extreme
caution so as not to suffer burns.
- Adjust the intensity of the flame by sliding the gas air mix regulator (7).
- Place the cooking utensil you wish to use on top of the grill.
The gas stoves are protected with an anti-corrosion treatment. Before the first
use, it is recommended to let it operate for a few minutes to prevent the
appearance of soot on the bases of pots and pans. This treatment will disappear
with use, and it is therefore likely that rust will appear over time on cast iron
components.

04.DECLARATION OF CONFORMITY

UDOM S.L. declares that the product with reference number 28.00.2 and
description "Cast iron gas stove" complies with the following CE marking
requirements:
EN 30-1-1:2008+A1:2010
English