ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
PARTS LIST
PART
MATERIAL CODE
NO.
1
TCS39SV-CS05-1
2
TCS39SV-CS04-1
3
62TCS39SVY101
Note:
The tiles are easy to be broken, be careful when
you remove them. Do not throw the residual tiles
away, retain them for future use.
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside facing
upwards. Fasten the legs (#2) to the underside of
the table top (#1) rim by using bolts (#5). Keep the
bolts loose. See Figure 1.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
!
assembled.
Do not sit or stand on this table.
!
A weighted umbrella base must be used when using an umbrella with this table.
!
Do not discard of any of the packaging until you have checked that you have all of the parts and
!
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
!
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
!
Quote the following FQC NO. when contacting the service center.
!
V-4
INTENDED FOR RESIDENTIAL USE ONLY.
TCS39SV
PART
Q'TY
TABLE TOP
LEG
CENTER
CONNECTOR WITH RING
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
DO NOT RETURN TO STORE!
STOP
PAGE 1 OF 2
4
13C??1B29008001
1
5
17C40A0705001YX
4
6
17KAA0101----Y4
7
1
17KAC3101----Y3
FIGURE 1
2
1
TILE
BOLT M6*15
HEX. KEY WRENCH 4MM
HEX. KEY WRENCH 10MM
2
2
2
15
#5 BOLT M6*15
COURTYARD CREATIONS INC.
8
12
1
1
5