Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
5
5
15
#5 BOLT M6*15
Step 2:
Fasten the center connector with ring (#3) to the
middle of the legs (#2) by using bolts (#5). Make
sure that all of the bolts have been tightened
completely. See Figure 2.
FIGURE 4
Warranty
• This product is covered by Courtyard Creations Inc.'s. one–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
No Need To Go Back To
The store where you made your purchase
does not stock parts for this item.
whether they are missing or damaged,
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
V-4
2
2
2
3
STOP!
Missing A Part?
The Store
If you need parts,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
For further assistance,
please visit us at
service.cci@polywares.com
DO NOT RETURN TO STORE!
STOP
FIGURE 3
2
A
Step 3:
Turn the table to its upright position. Place the
tiles (#4) onto the table top (#1) carefully.
See Figure 3 and Figure 4.
Note:
1) If any EVA foams on the table top (#1) are
missing, there are extra EVA foams in the
hardware kit. See Illustration A.
2) To use an umbrella with this table, remove
the plastic center plug and put the umbrella
pole through the table top and center
connector ring.
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
•Inspect and tighten all bolts and fasteners on a
regular basis to ensure the proper performance
and safety of your table.
•When moving the table, remove the umbrella and
lift. Do not drag this table.
•We recommend the use of furniture covers when
not in use.
•In order to prolong the life and beauty of your table,
we recommend that it be stored in a dry and
protected area during off season periods.
•The umbrella should be lowered and/or removed
in windy conditions.
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
PAGE 2 OF 2
4
1
Publicidad
