Delete Cameras; Cycle Cameras - Dragon Touch BabyCare Manual Del Usuario

③ Select the icon, then press "OK" button it will prompt "Camera is NO pair". Then
press "OK" button to start the pairing.
Picture 3
④ Press and hold the pairing button on the rear of camera for 1 second, then connect
successfully.
Note: You can add up to 4 cameras per baby monitor.
7
MENU CAM
OK
SHORT
TALK
-CUT
SOUND LEVEL
MIC
PAIR
IN-5V

2. Delete Cameras

① Enter menu setting, go to Cameras. Select the number of camera that you want to
delete. Select icon, press "OK" button.
② The screen will prompt "Camera is paired". Press "OK" to unpair. " , then press "OK"
button, the camera deleted successfully.
Camera paired. Press "OK" to unpair.

3. Cycle Cameras

Cycle through the list of connected baby cameras. And you also can use
cameras one by one.
Note: When volume is set to high, monitor will emit a loud noise if placed close to the
camera. This is normal phenomenon and can be resolved when camera is moved away
from the monitor.
MENU CAM
OK
SHORT
TALK
-CUT
SOUND LEVEL
MIC
MENU CAM
OK
SHORT
TALK
-CUT
SOUND LEVEL
MIC
to change the
CAM
8