Ec Declaration Of Conformity; Protecting The Environment; Technical Data - Stanley FATMAX FMCW210 Manual Del Usuario

ENGLISH
Replacing diamomnd shaped tip (Fig. G)
Replace the diamond shaped tip (9).
u
Replace and tighten screw (10).
u
Fitting and removing the dust cassette (Fig. H)
Slide the dust cassette (2) onto the connector (2a) and
u
make sure that it is securely located.
To remove the dust casette, pull it to the rear and away
u
from the rear end of the tool.
Use
Warning! Let the tool work at its own pace. Do not overload.
Switching on and off
To switch the tool on, depress the on/off switch (1) at the
u
forward position I.
To switch the tool off, depress the on/off switch (1) at the
u
back position O.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool or remove the battery pack.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com

Technical data

Input voltage V
dc
-1
Oscillations (no load)
min
-1
Orbits (no load) min
Sanding base surface 2
mm
Weight kg
8
(Original instructions)
FMCW210
12000
12000
Battery
Voltage
Capacity
Type
Charger
Input voltage
Output voltage
Current
L (sound pressure) 68 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 79 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (main handle) (a
Vibration emission value (aux. handle) (a

EC declaration of conformity

Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Stanley
Fat Max at the following address or refer to the back of the
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
18
Stanley Europe, Egide Walschaertsstraat14-18,
8866
0.88
V
DC
Ah
V
AC
V
DC
mA
) 5,9 m/s , uncertainty (K) 1,5 m/s
2
h
) 7,3 m/s , uncertainty (K) 1,5 m/s
2
h
MACHINERY DIRECTIVE
%
-
FMCW210 Sander
4:2009+A11:2011
manual.
Director of Engineering
2800 Mechelen, Belgium
FMC687L
18
2.0
1
90608625
230
18
2000
2
2
R. Laverick
23/08/2017