Walter WaluCOOL Manual Del Usuario página 11

Before attempting to wind your pool cover, ensure you have removed all its removable fasteners
When winding up the cover, ensure it rolls up straight on the first turns and that there are no foreign
WALU COOL slots simply into the square (15 x 15 mm) hole in the winding tube of your WALU POOL cover.
For covers already fitted with a square winding pin (13 x 13 mm) there is no need to install the winding pin
supplied with the WALU COOL.
4
Position the WALU COOL in front of the
winding tube of your pool cover at the opposite
end of the pool to the storage area, on the right
of the cover. (Left winding available as an
option)
6
Hold down the button on the remote
control and walk with the WALU COOL
until your cover is fully rolled up.
To unwind the cover, pull on the pull strap, positioning yourself on the opposite side to the
8
cover storage side (cf. instructions for use for your cover).
Instructions for use
(stainless steel fasteners, cabiclic cords...).
bodies on the cover or in the way of the WALU COOL.
5
Slot the square winding pin on the WALU
COOL into the square hole in your WALU
POOL as far as it will go.
(a)
7
When you have finished winding up the
cover, remove the WALU COOL by
pressing lightly on the REVERSE button (a)
situated at the back of the device in order to
release the winding pin more easily.
3/4