Residual Risks; Intended Use; Technical Data - Rebel RB-1099 Manual Del Usuario

• Do not allow paint to adhere to the nozzle as it could ignite.
• Do not place the nozzle against any object while using or immediately after use.
• Before storing, put the power tool on a foot and wait until it cools down completely.
• Do not place any objects inside the nozzle or ventilation slots.
• Never leave the hot air gun unattended when it is operating.
• Do not overload the power tool.
• Do not use the hot air gun to dry hair or clothes. risk of burning or fire.

Residual risks

even when the power tool is used as prescribed it is not possible to eliminate all residual risk
factors. the following hazards may arise in connection with the power tool's construction
and design:
• Damage to lungs if a dust mask is not worn.
• Damage to hearing if hearing protection is not worn.
• Health defects resulting from vibration emission if the power tool is being used over
longer period of time or not adequately managed and properly maintained.
• injuries and damage to property to due to broken accessories that are suddenly dashed.
Warning!
this power tool produces an electromagnetic field during operation. this field may
under some circumstances interfere with active or passive medical implants. to reduce
the risk of serious or fatal injury, we recommend persons with medical implants to consult
their physician and the medical implant manufacturer before operating this power tool.
INFORmaTION aBOUT THE POWER TOOL

Intended use

this hot air gun is intended for heating, drying, thawing (for example pipes) and stripping
old paints, varnish and stickers.
Use the power tool for its intended purpose only. any other use is deemed to be a case
of misuse. The user/owner of this power tool, not the producer, is responsible for any
damages or injuries caused by improper handling of this power tool.

Technical data

Power
Power supply
Power cord length
EN
2000 W
230 V; 50 Hz
1,8 m
26