Toparc Kit NUM-1 Manual De Instrucciones página 5

WARNINGS - SAFETY RULES
GENERAL INSTRUCTION
These instructions must be read and understood before any operation.
Any modification or maintenance not indicated in the manual must not be undertaken.
The manufacturer shall not be held liable for any personal injury or material damage caused by use not in accordance with the instructions in this
manual. In the event of a problem or uncertainty, consult a qualified person to handle the installation correctly.
This manual describes the wiring of this product. Any user who does not strictly comply with the safety instructions described in this manual may
be exposed to electrical risks and/or a serious or even fatal accident.
ELECTRIC SAFETY
During any intervention on the product, make sure to secure the area by keeping at a distance any person who has not read the instructions of safety
described in this manual. This product should preferably be installed by a professional in accordance with the installation rules in force in the country.
If not, it is recommended that you read these rules before working on it.
PRECAUTIONS AGAINST ELECTROSTATIC DAMAGE
Static electricity can damage electronic equipment. Use a grounded anti-static wrist strap, an ankle strap, or equivalent safety device
to prevent electrostatic damage (ESD) when installing this product.
Electrostatic damage can irreparably damage the generator and/or the product. To protect electronic components from electrostatic damage, place
this product on an antistatic surface, such as an antistatic discharge mat, antistatic bag, or disposable antistatic mat.
KIT CONTENTS
Wire harness
Connector
850 mm
Some configurations do not require all the elements of the Kit.
PRESENTATION
The digital kit NUM-1 (ref. 063938) allows an additional application on compatible MIG/MAG generators. It allows to add a digital remote control or a
wire feeder for a double wire feeder configuration.
Compatibility
NEOPULSE 320 C
062474
PULSEMIG 320 C
062641
NEOPULSE 400 CW
062061
PULSEMIG 400 CW
062658
NEOPULSE 400 G
014497
PULSEMIG 400 G
062665
NEOPULSE 500 G
014503
PULSEMIG 500 G
062672
RJ45 Cable
750 mm
Remote control
ref.
ref. 062122
KIT NUM-1
RJ45 Cable
Support plate
300 mm
External wire feeder
NEOFEED-4W PULSFEED-4W
ref. 014527 ref. 062689
-
-
-
-
- -
- -
- -
- -
Cap
EN
5