Technical Data - Sennheiser EK 2013 PLL Modo De Empleo

Technical data

Transmitter SK 2013 PLL
Frequency range
Frequency preparation
Frequency constancy
HF output power
HF radiation power
Perturbing radiation power
Modulation type
Rated lift/peak lift
Channel grid/switching band width
LF transmission range
Nonlinear distortion factor
at 1 kHz and rated lift
LF sensitivity min./max.
Input resistance
Operating voltage
Current consumption
Operating time
Battery check
Dimensions
Weight (incl. B 2013)
German ZZF Certification No.
Scope of delivery
Also included in the System 2013 (set of transmitter and receiver) are two securing plates
with retaining straps. The System 2013 is supplied in a sturdy transport and storage
carrying case.
2.15
SK 2013-6-D
SK 2013-6-1
SK 2013-6-2
SK 2013-6-3
SK 2013-8
SK 2013-9
8 m frequency band
8 m frequency band
8 m frequency band
8 m frequency band
4 m frequency band
2 m frequency band
Phase Lock Loop (PLL) Technique, 16 channels
± 2 kHz, -10° to +55° C
10 mW
1 mW
< 4 nW
FM
± 8 kHz / ± 10 kHz
SK 2013-6-D
SK 2013-6-1
SK 2013-6-2
SK 2013-6-3
SK 2013-8
SK 2013-9
40 - 16,000 Hz
typ. 1 %
4 mV/44 mV - Microphone input
150 mV/2.65 V - Aux. input
3kΩ - Microphone input
100 kΩ - Aux. input
2.4 V
approx. 55 mA
> 12 hours with RECHARGEABLE
battery pack BA 2013
> 36 hours with 2 x Alkaline AA cells in B 2013
red LED for operating voltage < 2.2 V
18 x 58 x 95 mm
approx. 130 g
A 014 926 B ME (only -6)
1 Transmitter SK 2013 PLL
1 Battery compartment B 2013
1 Projection antenna 44891
36.64-37.98 MHz
30-36 MHz
35-40 MHz
39-45 MHz
72.025-75.975 MHz
173.350-175.02 MHz
40 kHz / 2.34 MHz
40 kHz / 2 MHz
40 kHz / 2 MHz
40 kHz / 2 MHz
25 kHz / 4 MHz
25 kHz / 2 MHz