Using Your Jabra Bt300 Headset - Jabra BT200 Manual Del Usuario

Using your JABRA BT200 Headset
The multi-adapter needs to be ON for the headset to work. To turn the multi-adapter on:
1. Remove the headset from the multi-adapter, this will automatically turn the
multi-adapter ON.
2. The multi-adapter will then be in standby mode and ready for use.
3. The indicator light will flash every 3 seconds.
4. To turn the multi-adapter OFF, simply insert the headset to the multi-adpater holder.
Turning your headset ON and OFF
To switch your JABRA BT200 on:
1. Remove the headset from the multi-adapter.
2. Press and hold the Multi-Function button firmly for at least 3 seconds until the
indicator light flashes rapidly.
3. Release the Multi-Function Button.
4. The headset will now be switched ON (standby mode) and the indicator light will
continue to slow flash every 3 seconds.
10
To switch your headset off:
1. Press and hold the Multi-Function Button for 3 seconds until the indicator
light flashes rapidly.
2. Release the button. The headset is now turned off and the indicator light
will no longer flash.
(Please note you will need to wait at least 5 seconds before switching the
headset back on.)
Attaching the charger cradle clip
The charging cradle can be fastened to your belt or clothes
using the supplied clip. To attach the clip to the cradle follow
these simple instructions:
1. Locate the two slots on the charging cradle as shown.
2. Position the clip with one end in the top slot on the cradle.
3. Press the clip gently onto the charger cradle until the other
end fits into the bottom slot securely.
4. You will hear a clicking sound when this is correctly attached.
1
2
3
11