Ninja BN495EU Instrucciones página 18

IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
Read all instructions before using your
NINJA PERSONAL BLENDER
®
When using electrical appliances, basic safety precautions should always
be followed, including the following:
WARNING
To reduce the risk of fire, electric
shock, serious injury, death, or
damage when using this appliance,
follow these basic safety precautions.
General Precautions
32 NEVER operate the appliance
without lids and caps in place.
DO NOT attempt to defeat the
interlock mechanism. Ensure the
container and lid are properly
installed before operation.
33 DO NOT expose the containers
and accessories to extreme
temperature changes. They may
experience damage.
34 NEVER leave the appliance
unattended while in use.
35 DO NOT blend hot liquids. Doing
so may result in pressure buildup
and steam exposure that can pose
a risk of the user being burned.
36 DO NOT remove the cup from the
motor base while the appliance
is running.
33
37 Remove the Pro Extractor Blades
Assembly from the Single-Serve
Cup upon completion of blending.
DO NOT store ingredients before
or after blending them in the cup
with the blade assembly attached.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. For ingredient
storage in the cup, use only
Spout Lid to cover.
38 The maximum wattage rating for
this appliance is based on the
configuration of the Pro Extractor
Blades Assembly and Single-Serve
Cup. Other configurations may
draw less power or current.
39 Max ON time is 1 minute under
900W load. If the appliance
overheats, a thermal switch will
become activated and shut off
the motor. To reset, unplug the
appliance and let it cool down for
approximately 30 minutes before
using again.
40 DO NOT process dry ingredients
without adding liquid to the Single-
Serve Cup. The Single-Serve Cup is
not intended for dry blending.
41 To protect against risk of electrical
shock, DO NOT immerse the motor
base in water or other liquid.
42 DO NOT spray the motor base with
any liquids. Turn off and unplug the
motor base before cleaning.
SAVE THESE INSTRUCTIONS
ninjakitchen.eu 34 34