Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction
leaflet
Principle: Extraction air valves giving a permanent air volume when it is not connected and a higher air volume when connected to
230V.
The valve needs around 40 seconds to open.
Electrical characteristics:
Main supply: 1~230V
Electrical insulation: Class II (Without earth connection)
Installation:
For wall or ceiling mounting.
2
Use a cable 2 x 1,5mm
. Open the connection box cover (6). Introduce the cable from the back side of the valve, connect the cable
to the terminal and close the cover with the screw.
Fix the valve on the wall or ceiling using screws.
Do not open the cover 7.
Maintenance:
ATTENTION: Before manipulating the valve, make sure it is disconnected from the mains supply even if it has previously been
switched off. Prevent the possibility of anyone else connecting it while it is being manipulated.
The extraction air valves BM2D need regular maintenance (twice a year):
-
Remove the front grille 1 from the support 2
-
Remove the square duct 3 without touching the blades
-
Clean the front grille 1 and the square duct 3 with soft detergent.
-
Mount back the square duct without damaging the shaft blades.
-
Mount back the front grille 1 beginning by entering the spur 5 in the slot of the front grille.
IMPORTANT !
This appliance should only be installed configured and serviced by a professional electrician working in accordance with
the rules of good professional conduct, installation guidelines and applicable safety regulations.
Before powering up the appliance, make sure the supply voltage matches the voltage indicated on the product: connecting the appliance
to an incorrect voltage may destroy it.
Disconnect power before servicing the appliance. Do not touch live parts. Danger of death ! Electrical connections which do not conform
to the diagrams given in the notice and/or applicable installation requirements shall render our guarantee void.
2-AIR VOLUME EXTRACTION VALVE "BM2D"
BM2D
Ø178 (ext. valve)
Ø125 (duct)
3 holes Ø4
34
133
BM2D
~230V
Publicidad
