Maintenance Schedule; Maintenance Works - Kärcher 2.642-533.0 Manual De Instrucciones

Time Activity
daily empty
Multifunction
unit only:
opinion
before the opinion
frosting
period
After 40 Clean the filter
operating
hours or
once a
week
Care
After 80 Cleaning and
operating preserving
hours or
once every
two weeks
After 200 opinion
operating
hours or
opinion
once a
month
Spray
Multifunction
unit only:
Clean the filter
Quarterly Clean the filter

Maintenance Works

Open the remote control
1 Locking
 Unlock the lock.
 Pull the coin tray out to the side to re-
move the coin container.
 Pull the lock out.
 Tilt the front plate upward.
 Fold out the support and guide it into
the recess on the device.
10

Maintenance schedule

Assembly affect- Performance
ed
Coins container Empty the coin container
Tool storage box Check from the outside for foreing matters and contamination. Re-
move coarse contaminants.
Tool storage box Check both outlets for obstruction, clean if necessary.
Casing exterior Mix detergent "Wash hall and tile cleaner RM 841" at 10%, apply to
(stainless steel the surfaces, let it soak for 2 to 3 minutes, do not allow to dry. Rinse
and plastic thoroughly with high pressure jet after the soak time.
Mix detergent "Wash hall and tile cleaner RM 841" at 20 %, apply to
the surfaces, let it soak for 2 to 3 minutes. After the soak-in time,
clean the surfaces with a moist pad or microfibre cloth and then rinse
thoroughly by a high pressure jet. If desired, larger areas can be
cleaned using a rubber edged "Squeegee".
Casing exterior Take care of the stainless steel casing using steel cleaner.
(stainless steel)
All stainless steel Remove dirt and deposits. Preserve the parts using special steel
parts of the case care oil.
Program selec- Check the programme selection switch to see that it moves easily.
tion switch
Splash guard of Replace the splash guard if damaged.
coin acceptor
Lock Spray lock with lock spray.
Tool storage box Clean the storage boxes.
Coin acceptor Clean the coin mechanism.
Banknote reader Clean banknote reader.
(option)
Opening the multifunction unit
See "Emptying the coin box/multifunction
unit".
Clean the coin mechanism
 Open the coin acceptor, and clean the
coin channel with a moist cloth and
washing liquid.
3
-
EN
Clean banknote reader (option)
 Switch on the main switch of the sys-
tem.
 Open remote control.
1 Unlocking button
2 Banknote reader
 Push the release knob.
 Swivel down the banknote reader and
remove it from the holder.
By whom
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator